Yes, we always create a ventilated air gap under every metal roof installation. This is a critical step because metal panels conduct heat rapidly and are prone to forming condensation on their undersides when temperatures drop.
We use either vertical battens or a dimpled mat to maintain a ventilation cavity of at least 1 inch. This design allows for consistent airflow from the soffit to the ridge, which expels moisture before it has a chance to damage your roof sheathing.
Failing to include this air gap is a common installation mistake. When metal panels are fastened directly to the deck without separation, trapped humidity can lead to:
- Rust forming on the back of the metal panels.
- Rot developing silently in the plywood roof deck.
- Structural decay over time due to persistent moisture.
If you are concerned about your current roof, you can check for rust lines along fasteners in the attic or look for condensation on the underside of the panels on cold mornings. As a Trusted Roofing Contractor with over two decades of local experience, we ensure these technical details are handled correctly to protect your home’s future.
Related FAQs
-
How Much does it Cost to Add Ventilation to an Existing Roof?
Read More »: How Much does it Cost to Add Ventilation to an Existing Roof?The cost of adding ventilation to an existing roof depends on several project-specific factors. While a full roof replacement in Vancouver typically costs between $12 and $22 per square foot, adding or upgrading vents represents a relatively small fraction of…
-
How Many Roof Vents do I Need for a 1,500 Square Foot Attic?
Read More »: How Many Roof Vents do I Need for a 1,500 Square Foot Attic?To determine the correct number of vents for a 1,500 square foot attic, you should use the standard 1:300 ratio for Net Free Vent Area (NFVA). According to this formula, you need 1 square foot of NFVA for every 300…
-
What are the Best Types of Roof Vents for High-wind Areas in Bc?
Read More »: What are the Best Types of Roof Vents for High-wind Areas in Bc?Based on the provided content from Paragon Roofing BC, the best types of roof vents for homes in British Columbia include both passive and active ventilation systems. These systems are specifically recommended for their effectiveness in the Lower Mainland’s coastal…
-
Can Professional Vent Sealing Prevent Common Winter Roof Leaks?
Read More »: Can Professional Vent Sealing Prevent Common Winter Roof Leaks?Based on the provided content, professional ventilation upgrades like ridge vent installation and solar attic fan installation are highly effective at preventing common winter roof leaks caused by ice dams. In Vancouver’s climate, ice dams form when uneven roof temperatures…
-
Does Poor Attic Ventilation Cause Shingles to Curl and Age Faster?
Read More »: Does Poor Attic Ventilation Cause Shingles to Curl and Age Faster?Based on the provided content, poor attic ventilation is a major threat to a roof’s longevity. It causes natural heat and moisture to become trapped in the attic, which leads to several types of damage: To prevent these issues, it…
