What does the Installation of Cedar Shake Roofing Involve?
The installation of cedar shake roofing in Vancouver involves a systematic layered approach designed to ensure weatherproofing and durability in a wet coastal climate. The process typically takes 1 to 2 weeks for standard commercial projects and follows these primary steps:
- Site Preparation and Underlayment: The existing roof structure is inspected for damage, and old materials are removed. A water-resistant underlayment, such as asphalt-saturated felt, is applied to provide a stable foundation.
- Eave Starter Course: The first row of shakes is laid along the eaves using corrosion-resistant nails. Professionals space these nails 1 to 2 inches from the edge to prevent the wood from splitting.
- Progressive Courses: Shakes are installed upward in offset patterns. Joints must be staggered by at least 1.5 inches (or 40 mm per local code) to prevent leaks, typically with 10 inches of exposure per row.
- Ridge and Hip Capping: Pre-cut ridge shakes or caps are installed at the peaks and secured with two nails each to protect against wind-driven rain.
- Flashing and Finishing: Metal flashing is integrated around vents and chimneys to ensure proper drainage. Finally, edges are trimmed, and an initial sealant or preservative treatment, such as copper naphthenate, may be applied to inhibit rot and fungal growth.
Related FAQs
-
What is the Minimum Required Labor Warranty for Roofers in British Columbia?
Read More »: What is the Minimum Required Labor Warranty for Roofers in British Columbia?In British Columbia, the typical minimum for a roofing workmanship warranty starts at two years. While this serves as the baseline for many professional roofing contractors, the specific coverage can vary based on the contractor and the scope of the…
-
What is the Difference between a Manufacturer Warranty and a Labor Warranty?
Read More »: What is the Difference between a Manufacturer Warranty and a Labor Warranty?Understanding the distinction between a manufacturer warranty and a labor (workmanship) warranty is essential for protecting your roofing investment. Here is the primary difference between the two: Manufacturer Warranty: This covers the roofing materials themselves. It specifically protects you against…
-
How do I Ensure my Roofing Warranty Remains Valid after Installation?
Read More »: How do I Ensure my Roofing Warranty Remains Valid after Installation?To ensure your roofing warranty remains valid after installation, you must be proactive about maintenance, documentation, and adhering to specific contract terms. In British Columbia, both manufacturers and contractors require homeowners to uphold their end of the agreement to keep…
-
Does a Roof Warranty Transfer to the New Owner if I Sell my House?
Read More »: Does a Roof Warranty Transfer to the New Owner if I Sell my House?In many cases, a roof warranty can be transferred to a new owner, but it is not an automatic process. Whether your coverage carries over depends on the specific terms of your manufacturer and workmanship warranties. To ensure a successful…
-
Are 50-year Shingle Warranties Actually Verifiable in Bc?
Read More »: Are 50-year Shingle Warranties Actually Verifiable in Bc?In British Columbia, 50-year shingle warranties are common but require careful verification of the fine print. While manufacturers do offer these long-term coverages, they are rarely "lifetime" guarantees in the literal sense. Key details to verify include: Proration: Most 50-year…
